Silica Sand can be found in a number of locations across the UK. There are, however, only a handful of locations where true sub-angular Silica Sand can be found. One of the best locations is to the south of Malton, North Yorkshire.
With very fine sub-angular grains that promote effective drainage and sound compaction, our Silica Sand is perfect for equestrian applications. There is no official standard specified for equestrian use sand however we are able to identify the properties required which make a sand suitable for riding arenas, gallops, race tracks and lunging rings. The sub angular grains maintain firmness whilst resisting compaction and provide a comfortable and cushioned feel for those using the surface.
All of our sand products are graded to remove clay and silt to promote firmness whilst aiding drainage. Silica sands with a rounded grain should be avoided as they cause the surface to ride too deep. Inferior sand may lead to compaction, water-logging and eventual surface failure so beware of what you are buying, low clay contents along with high percentage silica contents should be a prerequisite for good quality silica sand.
Component |
% |
SiO2 |
96.81 |
Al2O3 |
1.48 |
Fe2O3 |
0.31 |
TiO2 |
0.26 |
CaO |
<0.05 |
MgO |
0.08 |
Na2O |
0.12 |
K2O |
0.66 |
ZrO2 |
0.08 |
BaO |
<0.05 |
SrO |
<0.05 |
Loss on Ignition |
0.43 |
BS Mesh Number |
Microns |
% Retained |
|
16 |
1000 |
0.00 |
|
22 |
710 |
0.00 |
|
30 |
500 |
0.07 |
|
44 |
355 |
0.34 |
|
60 |
250 |
3.28 |
|
85 |
180 |
24.86 |
|
120 |
125 |
60.71 |
|
170 |
90 |
9.13 |
|
240 |
63 |
1.11 |
|
Pan |
<63 |
0.18 |
|
American Foundry Sizing (AFS) Number |
81.6 |
||
Average Clay content (%) |
0.16 |
||
Grain Shape |
Sub-Angular |